Warlock

The WARLOCK is a large diameter, lightweight sport rocket. Even with its single 38mm motor mount, exciting H powered flights can be made for small flying areas. Spectacular I motor flights can reach up to 1000 ft. Features include through-the-wall fin tab attachment, 3/16" precision cut plywood fins and centering rings, quick link recovery attachment, 5/16" heavy-duty shock cord, sturdy centering ring shock cord mount, heavy-duty parachute.

Recommended motors:  I284-6, H260-5

Bruiser

The BRUISER is one of LOC's largest production kits! It uses a single length of LOC's BT-7.51 along with a PNC-7.51 to make assembly quick and easy. It has a single 54mm motor mount for prepping ease. Because of its light weight, it can be powered up on a single I class motor. Flights to 2000 ft. can be obtained using a J class motor. Check out the 3/16" precision cut plywood fins and centering rings, sturdy centering ring shock cord mount, through-the-wall fin tab attachment, quick link recovery attachment, 78" heavy-duty parachute

 Recommended motors: I284-6, J275-6

Bruiser - EXP

The BRUISER-EXP is LOC's largest payload production kit available! It has a main 54mm and two outboard 38mm motor mounts. This configuration allows you to power this brute with one, two, or three motors. A single K class motor can accelerate this vehicle to 3000 ft. altitudes. To accommodate this added power, a special three centering ring construction technique is used to maximize airframe and fin strength! A dual recovery parachute recovery system is used for soft landings. This kit is recommended for level 2 "K motor" certification. 

Features:
- 3/16" precision cut plywood centering rings
- 3/16" precision machined plywood fins
- 5/16" heavy-duty round elastic shock cord
- sturdy centering ring shock cord mount
- through-the-wall fin tab attachment
- large 30" payload section
- 48" heavy-duty parachute
- 78" heavy-duty parachute

Recommended motors: J415-8, K550-10

Bruiser - EXP 3

The NEW BRUISER-EXP-3" TTW has full L motor capabilities! This big guy utilizes LOC's NEW heavy-duty 75mm motor mount tubing and features TTW assembly, 1/8" fiberglass fins, and (3) 1/4" plywood centering ring construction. 

Features:
- 3/16" precision cut plywood centering rings
- 3/16" precision machined plywood fins
- 5/16" heavy-duty round elastic shock cord
- sturdy centering ring shock cord mount
- through-the-wall fin tab attachment
- large 30" payload section
- 48" heavy-duty parachute
- 78" heavy-duty parachute

 Recommended motors: I, J, K, L

7.5"  V2

The 7.5" V2 is one of LOC Precision's most famous kits. As a true father of rocketry, this historic design can be finished in any number of historic patterns or have fun with a custom design of your own. This Kit features a boat tail, precision cut plywood fins and centering rings and a LOC heavy duty parachute. Try this kit out with a J motor and watch it go!


Features:
- precision cut centering rings
- precision machined fins
- heavy-duty shock cord
- sturdy shock cord mount
- through-the-wall fin tab attachment
- heavy-duty parachute

7.5" Canadian Arrow and Russian R2

This is a new arrival to the LOC precision line. The 7.5" Canadian Arrow is modeled after the X Prize contest design. The R2 is modeled after the Russian version flown after WW2. It is the same high quality construction as the famous 7.5" LOC V2's but has a 7.5" longer body tube which also improves stability when flying with larger motors.

Features:
- precision cut centering rings
- precision machined fins
- heavy-duty shock cord
- sturdy shock cord mount
- through-the-wall fin tab attachment
- heavy-duty parachute