*****NEW*****

AGM-256 Pit Bull

AGM-256 Pit Bull: True Air Force-like styling is sure to command attention on the flight line! The Pit Bull is 35" tall and 2.6" in diameter. The Pit Bull weighs in at 29 ozs., and comes with a 30" chute. This kit is designed to fly on high impulse F and G motors for Pre-Cert flights and most H and I motors for Cert 1 flights. Comes standard with a 38mm motor mount. The Pit Bull comes with a 38mm motor mount. For 29mm motors, purchase the optional ADPTR-38/29 motor mount adapter. Rocket shown with Linear Rail Lugs LRL-10-2; order separately on the Launch Lug/Rail Guide page Page.

NOTE: PML does not offer conversion of the Pit Bull with CPR

Mini - BBX

This is the 2.1 inch version of our popular Black Brant X. The Mini BBX is very close to true scale and comes with detailed painting instructions. The Mini BBX is perfect for Level 1 Cert flights as it flies using high-impulse G through I motors in its 29mm MMT. When you’re ready, the Mini BBX can be retrofitted with the CPR-3000 altimeter-based Close Proximity Recovery system. As if that weren’t enough, the tail cone at the base of the rocket is designed to fit the optional Terrier Booster Stage for a truly authentic Black Brant X two-stage flight. As you may have already suspected, the Mini BBX kit includes a Quantum Tube airframe, a specially designed tail cone, and G-10 fins. The payload bay measures 21.5".

o see the Mini BBX already equipped with the CPR3000 Dual-Deployment Recovery System, [ click here ]. 

Terrier Booster

Turn your Mini-BBX into a real, high-flying two stage rocket. This is a very close scale replica of the bottom stage of the Black Brant X sounding rocket. Slip it under the PML Mini-BBX and you will have the complete, scale rocket! You can easily double the altitude and have the thrill of two stage flying without all the usual guesswork of a "standard" or scratch-built two-stage rocket. (We recommend the CPR version of the MiniBBX as the best for the Terrier. This is due to the tremendous altitudes the Terrier/MiniBBX combo will reach, and also because a CPR-based MiniBBX will still deploy the `chutes even if the sustainer stage doesn`t ignite, saving the rocket). The Terrier Booster is easy to assemble and very easy to prep. We spent months developing the best and most reliable inter-stage coupler on the market just for this kit. The Terrier Booster requires the PML Accu-Fire Timer available on our Electronics Page for upper stage ignition. 

Features:
2.5" Quantum Tubing airframe 
10" long 38mm MMT 
Scale urethane transition to Mini BBX sustainer stage. 
Booster equipped with piston ejection system and 30" PML parachute; uses motor ejection for booster recovery. 
Detailed, easy-to-follow instructions loaded with helpful graphics. 
Scale decal 

Amraam 2

By popular request, here`s a smaller version of our very popular AMRAAM-3 and AMRAAM-4 kits! Many people said they`d like PML to produce some kits for the F and G class motors, and here`s the first of `em. The AMRAAM-2 is designed specifically for flyers that want the great flights and military styling of the AMRAAM, but for smaller flying fields, smaller motors, or smaller budgets. It`s great for your first bigger bird, introducing a youngster or B.A.R. to higher-power rocketry, or when you want to wow `em with those great F and G motor flights on a smaller flying field. Priced right for your budget, but with PML design, quality, and standard features built-in! Flies great with 29mm F, G, and H motors. 

Features:
Pre-slotted Quantum Tube airframe 
G-10 fiberglass fins 
Piston ejection system 
Multi-panel nylon parachute 
Plastic nosecone 
Detailed decal sheet 

Amraam 3

Public Missiles, Ltd., the innovators of high power rocketry, bring you this beautiful, semi-scale model of the AIM-120 AMRAAM Missile standing 61.2" tall! As with all PML kits, we use only the highest quality materials 

Features:
Pre-slotted Quantum Tube airframe 
G-10 fiberglass fins 
"Kwik-Switch" motor mount for 29mm through 54mm motors 
Piston ejection system 
12" Payload Bay 
Multi-panel nylon parachute 
Payload section with plastic nosecone 
Explicit instructions 
Detailed decal sheet 

Amraam 4

PML is proud to offer this semi-scale model of the AIM-120 AMRAAM Missile standing 77.7" tall! As with all PML kits, we use only the highest quality materials. To purchase a AMRAAM-4 kit already equipped with the PML CPR3000 Dual-Deployment Recovery System, [ click here ] AMRAAM-4 w/CPR3k. 

Features:
Check out these features... Pre-slotted Quantum Tube airframe 
G-10 fiberglass fins 
"Kwik-Switch" motor mount for H through J motors 
Piston ejection system 
28.5" Payload Bay 
Multi-panel nylon parachute 
Payload section with plastic nosecone 
Explicit instructions 
Detailed decal sheet 

Black Brant VB

An excellent semi-scale model of the Canadian Black Brant 5b sounding rocket. Can be flown on G, H & I motors. This is the easiest to build scale rocket we have to offer. If you choose to purchase the Black Brant Vb with a 38mm MMT, for 29mm motors, purchase the optional ADPTR-38/29. 

Features:
Piston ejection system 
Heavy duty nylon parachute 
Pre-slotted Quantum Tube airframe
Plastic nose cone 
Explicit instructions remove guesswork 

Black Brant X

A very large (over 8-1/2 feet tall) model of the sustainer stage of Canada`s Black Brant 10 sounding rocket. Complete with "Kwik-Switch" motor mount, 0.093 G-10 fins and tailcone! Plenty of room for a large payload too. Weighs approximately 107 oz. and flies on H through J motors.

Features:
Pre-slotted Quantum Tube airframe 
G-10 Fiberglass fins 
Kwik-Switch motor mount 
Piston ejection system 
31.75" Payload Bay 
Multi-panel nylon parachute 
Plastic nose cone 
Thin-wall brass launch lug 
Explicit instructions remove guesswork

D-Region Tomahawk

An excellent 1/3 scale model of NASA`s single stage sounding rocket, standing 71" tall. This is a very stable design with lots of payload space. 

Features:
Pre-slotted Quantum Tube airframe 
G-10 Fiberglass fins 
Piston ejection system 
Multi-panel nylon parachute 
21" Payload Bay 
Plastic nose cone 
Thin-wall brass launch lug 
Explicit instructions remove guesswork 

1/4 Scale Patriot Missile

Public Missiles, Ltd., the innovators of high power rocketry, bring you this beautiful, semi-scale model of the Patriot Missile! The PML Patriot Missile is 1/4 semi-scale, standing 55.7" tall. Comes standard with 38mm motor mount. If you choose to purchase the 1/4 Patriot with a 38mm MMT, for 29mm motors, purchase the optional ADPTR-38/29. 

Features:
Pre-slotted Quantum Tube airframe 
G-10 fiberglass fins 
Multi-panel nylon parachute 
12" Payload Bay 
Payload section with plastic nosecone 
Explicit instructions 
Painting and detailing sheet 

1/2 Scale Patriot Missile

Public Missiles, Ltd., the innovators of high power rocketry, bring you this beautiful, semi-scale model of the Patriot Missile! The PML Patriot Missile is 1/2 semi-scale, standing 100" tall. 

Features:
Check out these features... Pre-slotted phenolic airframe 
G-10 fiberglass fins 
54mm motor mount for J through K motors 
Piston ejection system 
22" Payload Bay 
Multi-panel nylon parachute 
Payload section with fiberglass nosecone 
Explicit instructions 
Painting and detailing sheet 

Bull Puppy

Based on the U.S. Air Force`s Bull Pup missile, this kit is visually exciting on the ground as well as in flight! It`s perfect for beginners and experienced rocketeers alike. Don`t let the name fool you, this puppy is equipped with a 38mm motor mount and can be flown with 29mm motors using the optional motor adapter ADPTR-38/29. 39" tall and weighs approximately 32 oz. Can be flown on G through I motors. 

Features:
Dado-slotted Quantum Tube airframe for canard fins 
Pre-slotted plastic boat tail 
G-10 Fiberglass fins 
38mm motor mount 
Both original and military-style decals included 
Piston ejection system 
Multi-panel nylon parachute 
Plastic nose cone 
Thin-wall brass launch lug 

2.1 Bull Puppy

Based on the U.S. Air Force's Bull Pup missile, the Bull Puppy 2.1 is the latest addition to the Bull family of rocket kits. A great starter kit with excellent styling and performance. This puppy is perfect for pre-cert F and G flights and smaller fields. Comes complete with military style decals and a pre-slotted plastic boat tail. 28" tall and weighs approximately 20 oz. Can be flown on F through H motors. 

Features:
Dado-slotted Quantum Tube airframe for canard fins 
Pre-slotted plastic boat tail 
G-10 Fiberglass fins 
29mm motor mount 
Military-style decals included 
Piston ejection system 
Multi-panel nylon parachute 
Plastic nose cone 
Thin-wall brass launch lug 

NOTE  - Though it is not mandatory, PML does recommend the use of 2-Part Expanding Foam (available from Coast Rocketry) to aid in bonding the main fins to the boat tail.